RV Mounting Brackets suitable for mounting framed solar panels
RV mounting brackets, in packs of 4, suitable for mounting framed solar panels. The pack includes four stainless steel M6 flat washers, four stainless steel M6 flange nuts, four stainless steel 16mm M6 bolts and four alluminium mounting brackets.
Installation Instructions for RV Mounts
Mounting brackets for PV Panels - Installation guide
Attach the PV module to the slotted opening of each mounting bracket using M6 bolts, washer and nut supplied. The module can be attached at any position along the slot. Position the mounting feet for optimal fastening to the RV roof. The feet can be turned in any direction and can be fastened using any mounting hole. Securely tighten the PV module to the mounting feet. Securely attach the feet to the RV roof (hardware not included; requirements depend on roof). Use silicone or other sealant on any roof penetration.
Parts List: * 4 x M6 Flat Washer - Stainless Steel * 4 x M6 Flange Nut - Stainless Steel * 4 x M6 x 16 Bolt - Stainless Steel * 4 x Mounting Foot
Caution Stainless steel hardware can seize up, a process called galling. To significantly reduce the likelihood of galling, apply a small drop of anti-seize lubricant to the threads of all bolts before installation. Anti-seize lubricants are readily available in auto parts and hardware stores. In their absence, any lubricant will reduce chances of galling.
All Trademarks acknowledged as the property of their respective owners. Product information, specification and prices as supplied by the Manufacturers and subject to change without prior notification. Images for illustrative purposes only. E. & O.E.
SECURE PAYMENT via:
